Your reliable pneumatic clutch solution
for your pump application in drainage cleaning vehicles.
Thanks to the use of sintered linings, a suitable solution for the special requirements of sludge-vacuum vehicles was already on the market in the 1970s. Since then, the pneumatic clutch has been continuously optimized in regard to the lining wear resistance and the service life of the pressure disks.
Their continuous success is the result of their main features: Kendrion pneumatic clutches from the LINNIG brand are light, slim and robust. The clutch can be engaged quickly or over a period of several seconds with moderate progress – a flexibility that satisfied, long-term customers appreciate as much as new Kendrion customers.
Trust the original!
Did you know that Kendrion was the first company that developed this technology for pneumatic clutches?
Thanks to the use of sintered linings, a suitable solution for the special requirements of sludge-vacuum vehicles was already on the market in the 1970s. Since then, the pneumatic clutch has been continuously optimized in regard to the lining wear resistance and the service life of the pressure disks.
This is the reason, the pneumatic clutch is used in a large number of different vehicles. Whenever auxiliary units require reliable engagement or disengagement, the original Kendrion pneumatic clutch from the LINNIG brand is the right choice.
Technical data
| Series | LP600 | LP1000 | LP1500 | LP 2500 |
|---|---|---|---|---|
| Tightening torque Md in Nm | 600 | 1,000 | 1,500 | 2,500 |
| RPM, max. | 3,500 | 3,500 | 2,500 | 2,000 |
| Min. pressure in bar | 6 | 6 | 6 | 6 |
| Housing Ø in mm | 243 | 300 | 342 | 379 |
| Housing length in mm | 69.3 | 70.3 | 86 | 108.5 |
| Overall length, min.-max. in mm | 140.3-227.3 | 156.3-271.3 | 225-301 | 280-375 |
| Hole circle | 227/8 x 45° | 280/8 x 45° | 323/12 x 30° | 358/12 x 30° |
| Hub Ø in mm | 26-65 | 35-75 | 22-85 | 50-90 |
| Hub length in mm | 40-145 | 42-187 | 78-178 | 88-223 |
| Pulley Ø, min.-max. in mm | 118-335 | 180-335 | 200-450 | 300-446 |
| Belt marks, min.-max. | 1 x SPB - 8 x SPB | 3 x SPB - 10 x SPB | 4 x SPC - 12x SPB | 6 x SPC - 10 x SPC |
| Shaft length | 329 - 600 | 340 - 632 | 465 - 673 | 514.5 - 1234.5 |
| Shaft Ø | 40-50 | 40-55 | 55-60 | 70-76.8 |
| Rotary connection | M16 x 1.5 | M16 x 1.5 | M16 x 1.5 | M16 x 1.5 |
| Rotary connection of shaft clutch | M10 x 1.5 | M10 x 1.5 | M10 x 1.5 | M10 x 1.5 |
| Universal shaft Ø in mm | 90-120 | 100-120 | 120-150 | 120-168.2 |
| Hole circle | LK 74.5 4 x 90° - LK 101.5 8 x 45° | LK 84 12 x 30°-LK 101.5 16 x 22.5° | LK 101.5 16 x 22.5°-LK 130 8 x 45° | LK 101.5 26 x 22,5° -LK 155.6 8 x 45° |
