Change language
Kendrion contact
Head Office
Kendrion N.V.
Vesta Building - 5th floor
Herikerbergweg 213
1101 CN Amsterdam
The Netherlands
Contact now
change language
close
Contact
close
Change language
clear field
Kendrion contact
Head Office
Kendrion N.V.
Vesta Building - 5th floor
Herikerbergweg 213
1101 CN Amsterdam
The Netherlands
Contact now

KENDRION offers a variety of customer-specific and ready-to-use solution components and systems for laboratory and analysis technology. From point-of-care diagnostics to secure locking of laboratory centrifuges, we cover a wide range of solutions from solenoid, fluid and control technology.

Solenoid Valve for Gas Chromatograph (GC/GC-MS)
Gas chromatography is an analytical method in which a gaseous sample mixture is separated into individual chemical compounds for analysis of the composition. A gas chromatograph essentially consists of an injector, a separation column inside the GC oven and a detector. The injector is used to inject the sample into the separation column.

Our Solution:

With the Kuhnke solenoid valve from Kendrion, based on valve series 64, it is possible to precisely determine the flow paths of the gaseous sample inside the injector. Furthermore, the solenoid valve is perfectly suited for analytical purposes due to its high tightness and very low dead space. The solenoid valve with stainless steel capillary tubes can also be connected with a special fitting.

Your Benefits:

High cleanliness standard | High tightness | Low dead space | High reliability
Pneumatic modules for the point-of-care diagnostic
Our solution:

Modern diagnostic systems for the diagnosis of various viral diseases are used directly in the vicinity of the patient, the so-called point-of-care. The diagnostic process takes place in disposable cartridges, which are controlled by the cylinder of a
Plug and Play pneumatic module.
The pneumatic module from Kendrion combines pneumatic actuators with the valves required for the control via the Kuhnke AirBoard® – a circuit board with compressed air flowing through it. Combined with appropriate electronics, the pneumatic module impresses with its compactness and low power consumption. The specially designed components guarantee reliable operation even in harsh environments.

Your benefits:

Plug and Play functionality | Low power consumption | High reliability
Compact solenoid door lock for incubators
To ensure optimal growth conditions for your cell cultures inside the incubator, a safe and reliable door locking technology is necessary to prevent accidental door opening and avoid contamination or any temperature fluctuations within the incubator.

Our Solution:

The compact KENDRION solenoid lock is very robust and compact and due to the intelligent locking mechanism it is capable of a very high duty cycle. With its small size the solenoid lock has very high locking forces.

An integrated solenoid allows easy control and combines a quick release with quiet mechanical motion. The patented locking mechanism also allows the operator to unlock the doors when they are under load. A mechanical emergency opening is available.

The solenoid door lock offers different solenoid designs to provide SL (self locked) and AL (active locked) versions, as well as an optional pre-locking function. Integrated micro switches allow position monitoring of the lock.

Your Benefits:

High locking force | Easy control | Capability to unlock under load

More about KENDRIONs analysis technology

Modern analyzers deliver reliable test results in the shortest possible time based on the smallest sample quantities. It is important to accelerate the process flow and miniaturize the devices in order to carry out the analysis at the point of care, for example.

Precise and reliable solenoid valves and customer-specific pneumatic systems are used to control the increasingly common disposable cartridges (lab-on-a-chip). These combine the tightest of spaces with a high range of mechatronic functions.

KENDRION develops and supplies systems for mixing fuel gases for mass spectrometry. The software, the control and the necessary valves and controllers are developed in-house. The particular challenge in this area is a very high precision of the control behaviour, since the mixing ratio must be set exactly.

Medical and Analysis Technology

How can treatment time be shortened and patient comfort be improved at the same time? How can laboratory testing be automated and test results be faster made available? Those are current questions, medical device manufacturers and thus KENDRION work on. Together with you KENDRION goes new ways and as a result of its "Innovation Engineering" delivers customer specific plug-and-play system solutions out of the three expertises Fluid Systems, Electromagnetics and Control.

KENDRION is an established technology partner for the medical sector - from customer specific solenoid pitch valves up to mechatronic pneumatic modules for sample preparation in blood analysers. KENDRION supports its customers in various applications from early development phase up to later series deliveries. On basis of individual logistics concepts the whole product life cycle can be managed together.

KENDRION products used in the medical sector consist of e.g.:

Micro solenoid valves and pressure regulators according to the configuration you desire and the FluidBoard®, a subplate system for realization of easy as well as complex valve blocks in order to handle challenging liquid and gaseous media.

Laser shutters for fast and reliable blocking of the laser beam in optical systems.

Innovative locking technology for automatized closing and opening of doors, such as centrifuges.

 

-
Analytica
The world leading trade fair analytica has been your guarantee for the successful presentation of innovative laboratory technology and future-oriented biotechnology for nearly 50 years. It is the most important industry gathering and brings together the entire range of topics that pertain to laboratories in research and industry.
World's largest industry gathering—International trade fair

analytica is the world's leading marketplace for products and services along the entire value chain for modern laboratory processes. It is where the industry's key players and decision-makers meet.
Hall: A2, Booth: 225
Messegelände
81823 München
Germany
AdobeStock_221826107.jpeg
image overlay
Kendrion Industrial Actuators and Controls
Sales Team Malente