- Cost-efficient design
- Low space requirements
- High reliability
- Sorting technology
- Machines and installations as actuator, gate or hatch
- Safety engineering for locking
New Compact Rotary Solenoid CDR
Simple and Cost-Efficient Design
The CDR has a simple design, allowing for cost-efficient production and customer-specific adaptation. Furthermore, due to the integrated permanent magnet it is bistable which effects currentless holding in the rotor end position. The ball bearing ensures wear-free use.
Standard Variant Available
The standard variant of the rotary solenoid line CDR is the CDR030 with a diameter of 30 mm and a rotation angle of 90°. Supply voltage, torque and holding torque as well as further technical data can be seen in the table below.
Hall Sensor and Damper Suitable for Integration
Depending on the requirement the CDR can be customized. Provision is made for the one or two-sided integration of hall sensors to ensure the function monitoring of the solenoid. Furthermore, dampers can be installed to reduce the noise when the rotary solenoid switches. Due to the modular design more far-reaching adaptations can be realized with little development effort.
Specifications & Technical Details
|Specification||from - to|
|Sizes||30 x 30 x 46mm|
|Supply voltage||24 V DC|
|Torque (POWER ON)||1,2 (Start) - 3,5 (max.) Ncm|
|Holding torque (POWER OFF)||3,2 Ncm|
|Protection class||IP 30|
|Environmental temperature||from -10 to +40°|
|Hall sensor (optional)||minus switching, 5-30 V DC, max 30 mA|
|Comment||internal stoppers available|