Kendrion is your expert for holding brakes
In the event of a power failure the brakes engage. The robot remains in position, and the gripper remains closed, so that there is no damage to the workpiece. Production can continue seamlessly from the point where it was stopped.
Spring-applied brakes Servo Line
The spring-applied single-disc brakes Servo Slim Line which once more expand the wide product portfolio of Kendrion come in eleven different sizes with holding torques from 0.3 to 130 Nm. With the standard model the brakes can be mounted both on the flange and on the front side. It is also possible to mount inside the motor housing or at the bearing plate. Intermeshed joints between driver and friction disc minimise the circumferential backlash.
This makes them suitable for almost all areas where servo drives operate, from automation and robotics through packaging and conveying technology to assembly lines or storage systems.
Benefits at a glance
- Electrically released
- Surface mounting or flange mounting
- Built into motor housing, optional mounting outside the end shield
- Temperature range from -15°C to +120°C
- Toothed hub / friction disc connection with minimal circumferential backlash