Specifications & Technical Details
|Specification||from - to|
|Supply Voltage [V]||24 / 205V DC|
|Duty Cycle [%]||5 / 25 / 40 / 100|
|Stroke [mm]||3 - 30 In all solenoid models the solenoid stroke is the line “s” the armature has travelled from stroke starting position to stroke end position. The stroke starting position is the original position of the armature before the stroke movement starts resp. after the reset is finished. The stroke end position is determined by the solenoid design – it is the position the armature takes due to electromagnetic force.|
|Force [N]||0.5 - 550 The magnetic forces indicated are reached at 90% of the nominal voltage and in warmed-up condition.|
|Protection class device (IP)||IP00 / IP40|
|Protection class connection (IP)||IP00 / IP65|
|Installation Type||Lateral or on front side by threaded holes|
|Pull-in time [ms]||17 - 450 The values for the switching times refer to nominal voltage, warmed-up condition and a load with 70% of the magnetic force of the device.|
|Release Time [ms]||15 - 81|
|Accessories||Female connector with/without rectifier
Plug connector with overexcitation (nominal voltage max. 48W)
We deliver worldwide!
Your country of origin is not listed above, so please contact us.