Kendrion Worldwide

Division Automotive

Kendrion Holding

Kendrion N.V. is a public limited liability company incorporated under the laws of the Netherlands, with its registered office in Zeist.

For general requests:

> Contact
Kendrion Group Services
Industria_Energia_mulino a vento con freni a magnete permanente

Industrial Drive Systems

Freni a magnete permanente

Elevata coppia frenante costante per l'intera durata di servizio e ampio campo di temperature.

Freni a molle per servomotori - Servo Line

Servo Line

Freni monodisco a molle per servomotori

La gamma Servo Line è stata sviluppata per l’installazione integrata nei servomotori. I freni sono configurati come freni di fermo con funzione di arresto di emergenza.

Servo Line>
Freno a molle in plastica Aerzen


Freno a molle in plastica

L’innovativo freno elettromagnetico viene impiegato laddove sono richiesti freni leggeri e di piccole dimensioni. Nelle applicazioni di serie, la produzione ottimizzata garantisce un buon rapporto prezzo-prestazioni.

Maggiori informazioni sui freni a molle in plastica>

Elevation Line

Freni per impianti di sollevamento

I prodotti della ELEVATION Line vengono utilizzati principalmente per gli ascensori, ma sono indicati anche per tutte le applicazioni che devono soddisfare rigorosi criteri di sicurezza. Nei freni elettromagnetici a molle la coppia frenante viene generata quando viene tolta l'alimentazione.

Freni monodisco in esecuzione anti-deflagrante EEX Line

EEX Line

Freni monodisco in esecuzione anti-deflagrante

Nei freni a pressione di molle con protezione antideflagrante tutti i componenti che potrebbero causare l'innesco di sostanze esplosive sono racchiusi in uno speciale involucro.

This text is only available in English

Spring-applied brakes of Kendrion

Kendrion spring-applied brakes impress due to their comprehensive range of products that can be specifically adapted to the relevant application case. Electromagnetically operated spring-applied brakes build up the braking torque after the electric current has been switched off. The braking effect can be removed either via the electromagnetic power or via an additionally attached manual release.Spring-applied brakes impress with their high permitted braking energy and good resistance to wear. They are therefore predestined for use in robotics, elevators and in lifting and travel drives.

Spring-applied brakes – the simple-to-install all-rounders

The requirements of lifting and travel drives with high braking energy and defined brake torque to ensure controlled deceleration (not too fast and not too slow) in case of an emergency stop cannot be addressed by permanent-magnet brakes. Also, there are many applications that do not require high dynamics or high power densities. Typical examples are cranes, overhead conveyors or roller shutters. The brake has to ensure safe and reliable braking, produce high deceleration rates per braking operation in case of an emergency stop and safely hold the weight of the load. Switching times and power densities only play a minor role. High braking work (energy) can be easily handled by the organic friction linings of the spring-applied brakes. When necessary, spring-applied brakes can also be used as dynamic brakes. Moreover, owing to the low weight of their friction discs spring-applied brakes have a lower moment of inertia than permanent-magnet brakes. An additional factor worth noting is that the systems mentioned above are generally equipped with IEC standard motors which enable fast and easy installation of spring-applied brakes. In most cases, the brakes remain easily accessible after mounting. The design of spring-applied brakes is less complex that that of permanent-magnet brakes. So any application that can be implemented using a conveniently priced standard motor will generally include a spring-applied brake. Different types of friction linings are available to provide customized solutions for any specific application and temperature range. If suitable organic friction linings and springs are used, spring-applied brakes can be easily designed to achieve the desired torque within a relatively narrow tolerance band. And if the temperature range is relatively small, the torque achieved can be easily maintained across this range. Despite all these benefits, spring-applied brakes undergo constant improvement.

The new Servo Line spring-applied brakes complete Kendrion's product portfolio. They were developed for integration into servo motors and can be built into the motor housing or mounted outside the end shield. Servo Line brakes were designed for use as holding brakes with emergency stop function.