- Modular construction
- Large selection of different modules
- Easy to configure, fast signal transmission
Kuhnke FIO is a system of I/O modules to link the process signals within an EtherCAT network. It consists of the bus coupler and various I/O modules.
In the EtherCAT Bus Coupler or small controller, the signal processing and the generation of system voltages occur for the I/O Module. Between the I/O modules, the EtherCAT protocol is used.
At the end of the modular device the connection of go-and-return line will be closed automatically or transmitted with the help of an extender to the next EtherCAT participants. The small control Kuhnke FIO Controller 113 is a mini-IPC on ARM based.
Modern industry-standard interfaces allow the connection to higher-level controllers as well as the connection of fieldbus devices. The Kuhnke FIO Controller 113 can be individually extended with modules of the FIO I/O system, the programming is done with CODESYS V3.
General Technical Specifications
|Programming with||CODESYS 3.|
|Field bus||EtherCAT ® - master, CANopen|
|Mounting||35 mm DIN-Rail|
|Indication||LED, assigned to the clamping point locally|
|Shield connection||Directly at module|
|I/O connection||Spring- loaded plug with mechanical ejection|
|Connection voltage||24 V DC (-20% / +25%)|
|Temperature range||0 °C … 55 °C|
|Dimensions (WxHxD)||25 x 120 x 90 mm|
|Housing material||Aluminium, plastic|
|Interference immunity||Zone B per EN61131-2|
Further Products of the Kuhnke Controller Line
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CODESYS is a product of 3S-Smart Software Solutions GmbH.
We reserve the rights of modification, omission, error. Illustrations similar.