MHS Induction generator
6 x 3 kW
610 661 00
The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.
The devices are intended for installation in control cabinets and can only be used in conjunction with MHS controllers.
- Independent control of 6 induction coils
- Industrial-grade, rugged device design
- 18 kW continuous power
- Control connection via MHS controller
Technical details
| Description | Value |
|---|---|
| Functions | Integrated power measurement, short circuit detection, DC link monitoring, automatic frequency tuning, resonance frequency monitoring |
| Load type | specific induction coils (inductance 875 μH ± 150μH) |
| Number of channels | 6 channels individually controllable |
| Operating power | 6 x bis zu 3 kW, continuous power 18 kW |
| Product status | System product |
| Operating frequency | 2 ... 25 kHz, automatic operating point determination |
| Supply voltage | 3 x 400 VAC +10% /-15%; 50/60 Hz; Network configuration TT or TN |
| Modul bus | Data communication via CAN, electronic supply 24 VDC |
| Cooling | Forced air cooling, power loss max. 250W |
| Mounting | Prepared for installation on cabinet mounting plates |
| IP-Protection Class | IP 20, Device for mounting in a closed, metallic control cabinet |
| Dimensions (W x H x D) | Book Size steel housing with stainless steel cover, (451 x 105 x 313) |
| Operating temperature | In vertical installation position: 0°C ... 35°C |
