Kendrion Worldwide

Division Automotive

Kendrion N.V.

Kendrion N.V. is a public limited liability company incorporated under the laws of the Netherlands, with its registered office in Zeist.

For general requests:

> Contact
Kendrion Group Services
Kendrion is manufacturer of high speed linear solenoids, high force linear solenoids and electromagnets.

Fast acting solenoid

The fast acting solenoids of the High Performance Line excel by an enormous stroke density and a flexible modular system.They are used wherever large forces, short duty cycles and high efficiency with limited installation space are required.

Product Information

The fast-acting solenoids excel by an enormous stroke density and a flexible modular system.

These sqare solenoids are used wherever large forces, short switching times and high efficiency with limited installation space are required.

They fulfil the special requirements when used in high voltage circuit breakers and railway door lockings as well as in general actuating functions in automation and medical engineering.

The mode of operation of the solenoid is based on the force exerted on ferromagnetic bodies in the magnetic field. Electromagnets transform electric energy into mechanical energy.

Basically the stroke movement takes place from the stroke starting position to the stroke end position (active direction of movement), while the armature reset is accomplished by external forces, e.g. by spring, weight or magnetic forces (passive direction of movement).

The fast acting solenoids are actuators in which the force of an electromagnetic field is used to perform a longitudinal movement. The stroke limitation can be set by hand for every application. The solenoids can be installed in any position, but the force transfer should be in axial direction only.

Integrated return spring optional

In this product line the reset can optionally be performed by an integrated return spring. The solenoid armature is reset to the starting position.

Specifications & Technical Details

Specification from - to
Supply voltage [V] 24 - 205 V DC / 230 V AC*
Duty cycle [%] 5 / 25 / 40 / 100
Stroke [mm] 5 - 30
Force [N] 5 - 120 The magnetic forces indicated are reached at 90% of the nominal voltage and in warmed-up condition.
Protection class device (IP) IP40 / IP54
Protection class connection (IP) IP65
Accessories Connector with or without rectifier
Fork head with or without ES-bolt
Bellow
Installation type On front end via two threaded holes
Thermal class F
Pull-in time [ms] 60 - 200 The values for the duty cycles apply for nominal voltage, warmed-up condition and load with 70% of the magnetic force of the device.
Release time [ms] 40 - 100
Comments *A box mounting receptacle with integrated bridge rectifier allows the use with AC.